I use a utility knife to cut vinyl plank flooring.
Vinyl plank flooring is a great way to update the floors of any home. It’s affordable, easy to clean, and has a timeless look that will stand the test of time. But what do you use to cut vinyl plank flooring?
There are a number of different tools that can be used to cut vinyl plank flooring. The most common tool is a circular saw, but other options include a jigsaw, a miter saw, and a handsaw.
Vinyl plank flooring is a popular option for many homeowners, but there are a few things you need to keep in mind if you’re considering this type of flooring. In this article, I’ll take a look at what types of tools you’ll need to cut vinyl plank flooring, and give you a few tips on how to do it correctly.
Let’s get started.
What Do You Use To Cut Vinyl Plank Flooring
A sharp utility knife and a straight edge are the best tools for cutting vinyl plank flooring.
When it comes to cutting vinyl plank flooring, there are a few different tools that can get the job done. Here are a few of the best options:
Table saw:
This is probably the best option if you need to make a lot of cuts or if you need to make precision cuts. A table saw is a power tool that can make straight and angled cuts in vinyl plank flooring. It is a versatile tool that can be used for cutting large pieces of flooring.
Miter saw:
A miter saw is a power tool that can make precise, straight cuts in vinyl plank flooring. It is typically used for cutting long pieces of flooring at a 90-degree angle. This is a good option for making cuts at angles.
Jigsaw:
A jigsaw can be used to make curved or irregular cuts in vinyl plank flooring. This is a good option for making cuts in tight spaces. This tool is more expensive than a utility knife or T-square, but it can make a wider variety of cuts.
Utility knife:
A utility knife, also known as a box cutter, can be used to make straight cuts or for trimming the edges of the vinyl plank flooring. It is a simple and inexpensive tool that can be used for small cuts or trimming.
Vinyl Plank cutter:
A vinyl plank cutter is a specialized tool designed specifically for cutting vinyl plank flooring. It can make precise, straight cuts and has a built-in guide to ensure that the cuts are straight.
Power Drill
This is a good option for making pilot holes for screws or for making holes for dowels.
Now that you know some of the best tools for cutting vinyl plank flooring, let’s take a look at a real-life example.
Suppose you need to cut a piece of vinyl plank flooring to fit around a corner in your room. In this case, you would probably want to use a jigsaw. First, you would measure the width and height of the space you need to fill. Then, you would mark the vinyl plank flooring where you need to make your cuts.
Next, you would set up your jigsaw with a blade that is designed for cutting vinyl. Then, you would carefully cut along the lines you had marked. Once you had made your cuts, you would fit the vinyl plank flooring into the space and trim any excess material with a utility knife.
That’s it about what do you use to cut vinyl plank flooring.
What Is The Best Way To Cut Vinyl Plank Flooring?
The best way to cut vinyl plank flooring is with a sharp utility knife.
If you’re looking to install vinyl plank flooring in your home, you’re in for a treat. This type of flooring is not only beautiful and easy to install, but it’s also easy to cut. Now, we’ll show you the best way to cut vinyl plank flooring so you can get the job done quickly and efficiently.
The first thing you need to do is gather the supplies you’ll need.
You’ll need
- a vinyl plank cutter
- a straight edge
- and measuring tape.
Once you have your supplies, you are ready to get started.
Procedure
To start, you’ll need to measure the area where you’ll be installing the flooring. Once you have your measurements, you can start cutting the planks to size.
To do this, simply line up the straight edge with the edge of the plank and use the vinyl cutter to score a line. Once you’ve scored the line, you can snap the plank in half and repeat the process for the other half.
If you need to make any cuts around obstacles like cabinets or appliances, you can use a jigsaw to make the cuts. Just be sure to use a blade that’s designed for cutting vinyl.
Once all of your planks are cut to size, you’re ready to install them. Start by applying a layer of adhesive to the subfloor. Then, working from one end of the room to the other, start laying down the planks. Be sure to line up the edges and seams as you go.
Once all of the planks are in place, you can trim off any excess with a utility knife. And that’s it. You’ve successfully installed vinyl plank flooring.
How To Use A Vinyl Plank Cutter?
If you’re looking to cut vinyl plank flooring yourself, there are a few different tools you’ll need. The most common is a vinyl plank cutter, which can be found at most home improvement stores.
Here’s how to use one:
- Measure the length of the plank you want to cut and hold it up against the edge of the cutter. Make sure the grain of the wood runs perpendicular to the blade.
- Press down firmly on the arm of the cutter, and then slowly release the pressure as you move the blade towards the plank. Be careful not to jerk or suddenly move your hand while cutting; this could cause unpredictable cuts in your flooring.
- When you reach the end of your plank, stop moving the blade and release your grip on it. The installer will attach your new plank by securing it with nails or screws at either end of your cut line (depending on what type of installation they’re using).
Tips For Cutting Vinyl Plank Flooring
If you’re thinking about installing vinyl plank flooring, here are some helpful tips:
- Begin by measuring the area you’ll be covering. Vinyl plank flooring is a bit more expensive than other types of flooring, so it’s important to get the right size.
- Use a straight edge to draw a line across the room where you want the plank to start. This will help you determine how wide your cut will need to be.
- Use a jigsaw or a belt sander with medium grit sandpaper to make your cutting surface as smooth as possible. Be careful not to sand through the vinyl.
- When cutting multiple planks at once, use a saw with a fine-toothed blade to prevent chipping.
- Be sure to wear safety goggles and gloves while cutting, and keep an eye on the wood grain while you’re working.
- Practice on scrap pieces before cutting the actual planks to get a feel for the tool and material.
Pros and Cons of Cutting Vinyl Plank Flooring Yourself
There are many reasons to consider cutting vinyl plank flooring yourself instead of hiring a professional.
Here are the pros and cons of each approach:
Pros of Cutting Vinyl Plank Flooring Yourself:
- You can save money. Hiring a professional to cut vinyl plank flooring can cost hundreds or even thousands of dollars, depending on the size of the job. You can often do the job yourself for much less.
- You can customize your flooring to your exact specifications. If you’re familiar with basic carpentry skills, you can customize your vinyl plank flooring to fit your specific needs and desires. A professional may not be able to accommodate these changes as easily.
- You can cut vinyl plank flooring in any shape or size you want. A professional may only be able to cut planks that are a certain width or length. You can also choose to have your vinyl plank flooring cut into pieces that are any size you like – perfect if you don’t have enough room for a full sheet of flooring but want some sections covered (like a hallway).
Cons of Cutting Vinyl Plank Flooring Yourself:
It’s possible to make mistakes when cutting vinyl plank flooring. If you’re not experienced in carpentry. There’s a chance that you’ll make mistakes that will cause damage to your floorboards or floor space. Hiring a professional will almost always guarantee.
FAQ
How Do You Cut Vinyl Plank Flooring?
What Do You Need To Cut Vinyl Plank Flooring?
Sum Up
When it comes to cutting vinyl plank flooring, there are a few different options that you can choose from. The first option is to use a saw. You can either use a handheld saw or a table saw, depending on what you have available and what you feel most comfortable with.
The second option is to use a utility knife. This is a great option if you don’t have a saw available or if you just prefer to use a knife.
The third option is to use a vinyl flooring cutter. This is a specialized tool that is designed specifically for cutting vinyl plank flooring. It is more expensive than the other options, but it will make the job a lot easier and faster.
I hope, you cleared your question about what do you use to cut vinyl plank flooring. If you have any other questions, please feel free to ask them in the comments below.
2 thoughts on “What Do You Use To Cut Vinyl Plank Flooring: Ultimate Tips”
Comments are closed.