How To Cut Vinyl Plank Flooring Around Corners: Know Best Ways

Cut vinyl plank flooring around corners by using a utility knife to score the plank and then snapping it along the score line.

As a homeowner or contractor, you know that one of the most difficult tasks is to cut vinyl plank flooring around corners. When the plank is tightly fitted around the corner, it’s difficult to make a clean cut.

If you’re installing vinyl plank flooring in your home properly, you’ll want to know how to cut vinyl plank flooring around corners.

To achieve perfect-looking corners every time, there are several steps to follow when cutting the vinyl plank flooring material.

By following these steps and being attentive to detail, any homeowner with basic tools will be able to easily install stunning vinyl planks around their room’s corners.

In this article, I’ll discuss exactly how to get beautiful cuts around every corner of your room using DIY techniques.

Table of Contents

How To Cut Vinyl Plank Flooring Around Corners?

To cut vinyl plank flooring around corners, use a utility knife or a saw.

If you’re installing vinyl plank flooring in your home, you’ll likely need to cut the planks to fit around corners.

Here’s a general process for cutting vinyl plank flooring around corners, which you can follow:

Measure the length and width of the area and mark it with a pencil. Where you’ll be installing the vinyl plank flooring.
Use a straight edge to make a line where you will be cutting the plank.
Use a utility knife to score the top surface of the vinyl plank flooring.
Place the scored vinyl plank flooring on a cutting board and use a sharp knife to cut along the scored line.
Repeat steps 2-3 until all the vinyl plank flooring is cut to size.
Install the vinyl plank flooring according to the manufacturer’s instructions.

Here’s a real-life example:

You’re installing vinyl plank flooring in your living room and need to cut the planks to fit around the corners of the room.

You measure the length and width of the living room and find that you’ll need to cut the vinyl plank flooring into 12x 12pieces to fit around the corners.
You use a utility knife to score the top surface of the vinyl plank flooring.
You place the scored vinyl plank flooring on a cutting board and use a sharp knife to cut along the scored line.
You repeat steps 2-3 until all the vinyl plank flooring is cut to size.
You install the vinyl plank flooring according to the manufacturer’s instructions.

Advantages Of Proper Cutting Vinyl Plank Flooring:

Proper cutting of vinyl plank flooring can result in several advantages, including:

A cleaner and more precise cut: Using the proper tools and techniques can result in a clean, straight cut that is free of jagged edges or rough spots.
Improved fit and appearance: By cutting the vinyl plank to the right size, it will fit better and look more seamless when installed.
Reduced waste: Proper cutting can help to minimize the amount of waste material, which can save you money and reduce your environmental impact.
Better durability: By cutting the vinyl plank correctly, it will be less likely to warp or become damaged over time, which can prolong the life of your flooring.

What Is The Best Way To Cut Vinyl Plank Flooring Around Corners?

Cut the vinyl plank flooring at a 45-degree angle around the corners.

<br>

Best Ways Of Cutting Vinyl Plank Flooring Around Corners

The best way to cut vinyl plank flooring around corners will depend on the tools and equipment you have available, as well as your level of experience and skill.

Here are a few options:

Using a utility knife: This is the simplest method and can be done with just a straight edge and a sharp utility knife. Make a score along the line where you will be cutting, then bend the plank to snap it along the score line.
Using a miter saw: If you have a miter saw power tool, you can set it to make angled cuts, which can be useful for cutting around corners. This method is more precise and accurate than using a utility knife. But it does require some skill and experience to use a miter saw.
Using a jigsaw: A jigsaw can also be used to make cuts around corners. But it can be a bit more difficult to control the saw. So this method may be more challenging for someone who is not experienced with using a jigsaw.
Using a coping saw: This is a hand-held saw that can be used to make precise cuts around corners. It is a bit more difficult to use than a utility knife. But it can be a good option if you don’t have access to a miter saw or jigsaw.

Best Ways to Cut Vinyl Plank Flooring Around Corners

Yet, the best technique for you will turn on your own skills and the tools you have available. It’s always a good idea to practice on a scrap piece of vinyl plank flooring before cutting into your actual materials.

If you’re installing vinyl plank flooring in your home, you’ll want to know the best way to cut it around corners.

Here’s a step-by-step guide:

Measure the width of the vinyl plank and the length of the wall.
Mark the vinyl plank at the appropriate length.
Cut the vinyl plank with a utility knife or a saw.
Fit the vinyl plank into the corner and secure it with adhesive.
Trim any excess vinyl plank with a utility knife.

How to cut vinyl plank flooring around corners Here’s a real-life example:

If you’re installing vinyl plank flooring in your kitchen, you’ll need to cut it around the corners of the cabinets. First, measure the width of the vinyl plank and the length of the cabinet. Then, mark the vinyl plank at the appropriate length.

Cut the vinyl plank with a utility knife or a saw. Fit the vinyl plank into the corner and secure it with adhesive. Trim any excess vinyl plank with a utility knife.

Common Mistakes In Cutting Vinyl Plank Flooring

Making mistakes in cutting vinyl plank flooring is definitely possible, but with the right planning and execution, it’s not too difficult to get the job done correctly.

Here are a few common mistakes to watch out for when cutting vinyl plank flooring:

Using a dull blade: A dull blade can make it difficult to make precise cuts and can cause the vinyl plank flooring to fray or chip. It’s necessary to utilize a sharp blade when cutting the vinyl planks.
Not using a straight edge: When cutting vinyl flooring, it’s important to use a straight edge, such as a T-square or a ruler, to ensure straight and accurate cuts.
Not measuring and marking accurately: Before cutting, it’s vital to measure and mark the plank accurately to ensure a tight fit. Improper measuring and marking can lead to gaps or uneven edges in the final installation.
Not allowing for expansion gap: When cutting the vinyl planking, it’s important to remember to leave an expansion gap around the perimeter of the room. This is necessary to allow the planks to expand and contract with temperature and humidity changes.
Not using the right tool: Each type of vinyl plank flooring requires a different cutting tool, depending on its thickness and construction. It’s crucial to operate the right tool to ensure a precise and clean cut.
Not taking into account the direction of the planks: Some vinyl floor has a “grain” direction. This should be taken into account when cutting, to avoid having the planks look different from one another.

By avoiding these mistakes and taking the necessary precautions, you can ensure a successful and precise cutting of your vinyl plank flooring.

FAQ- How To Cut Vinyl Plank Flooring Around Corners

How Do You Cut Vinyl Plank Flooring So It Looks Good Around Corners?

To cut vinyl plank flooring so it looks good around corners, you will need to use a saw with a blade designed for cutting vinyl. You will also need to make sure that you cut the vinyl at a 45 degree angle so that the corners are clean and crisp.

What Are Some Tips For Cutting Vinyl Plank Flooring Around Corners?

Cutting vinyl plank flooring around corners can be tricky, but there are a few things you can do to make the process easier. First, use a sharp knife or utility blade to score the vinyl plank along the line where you want to make the cut. This will help you get a clean, straight cut. Next, use a straight edge or a T-bar to guide your cut. Slowly and carefully run the blade along the edge of the straight edge, following the line as closely as possible. Finally, use a putty knife or another sharp object to remove any excess vinyl that might be clinging to the edge of the cut.

Final Words

Cutting vinyl plank flooring around corners can seem like a daunting task, but with the right tools and techniques, it can be done with ease.

Remember to always use a sharp blade and take your time for precise cuts. The key is to measure and mark your cuts properly and use the appropriate cutting method for your type of vinyl plank flooring.

By following these simple steps, you can create a beautiful and seamless installation that will last for years to come.

If you’re still having trouble understanding how to cut vinyl plank flooring around corners, feel free to leave a comment below, and we’ll try to help you out.

Read More: